Peaktech 1195: 2-kanaals draagbare oscilloscoop met digitale multimeter

100 MHz - 2 kanaals digitale oscilloscoop

This combination of 2 CH/100 MHz digital storage oscilloscope with True RMS multimeter are making a complete solution for measurement needs. The creative design for short cut keys simplify all the operation and the high resolution 3,8 inch color display with TFT panel helps to observe the waveform work, whereas the long time operation li-ion battery guarantees the continuous work. This instruments is ideal equipment for modern measurement world and onsite measurement.
 

  • USB interface
  • Socket für USB-stick to save data portable
  • Support alternative trigger
  • Advantage video trigger function and optimize trigger sensitivity
  • Record length 6K
  • True RMS multimeter
  • Dual independet galvanic separated (for multimeter and between oscilloscope and multimeter)
  • Auto-scale and auto-setup function in oscilloscope mode
  • 5 V 1 kHz output for adjusting the measurement probes
  • Safety: EN 61010-1; CAT II 400 V
  • Accessories: AC-DC-adaptor, 2 pcs. oscilloscope probes, testleads, cable for connection to USB mass storage, extension module for small capacitance measurement, USB-interface cable, software-CD for Windows 2000/XP/VISTA and 7, carrying case and manual
Bandwidth 100 MHz
Sample rate     1 GSa/s each channel
CH     2
Display 9,7 cm (3,8”) TFT, 65535 colors
Resolution 640 x 480 Pixel
Input coupling DC, AC, GND
Input impedance 1 MΩ ± 2 % / 20 pF ± 5 pF / 400 V DC or ACpp
Vertical sensitivity 8 Bit (2 channels simultaneously)
Input voltage 400 V DC or ACpp
Accuracy ± 5 %
Coupling DC, AC, GND
Rising time < 3,5 ns
Time base range 5ns/div ~ 100s/div
Sampling range 10 S/s ~ 100 MS/s
Accuracy   +100 ppm
Trigger-type     Edge, Video, Alternate
Trigger-mode (Edge) Auto, Normal, Single
Trigger-sensitivity  DC, AC, LF-REJ, HF-REJ
Atom. measurement peak-peak, cycle RMS, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, rise time, fall time, +width, -width, +duty, -duty, delay A-B (rising), delay A-B (falling), frequency, period mean
Storage length 6000 points / CH
Waveform storage +, -, *, /, FFT
FFT-function available
Interface USB Device 2.0, USB Host 1.1
DIGITAL MULTIMETER USB
DC voltage  400 mV/4/40/400 V; ± 1 % + 1 dgt.
AC voltage 4/40/400 V; ± 1 % + 3 dgt., 40 ~ 400 Hz
DC current 40/400 mA/10 A; ± 1,5 % + 1 dgt
AC current 40/400 mA/10 A; ± 1,5 & + 3 dgt.; 40 ~ 400 Hz
Resistance 400 Ω/4/40/400 kΩ/4/40 MΩ; ± 1 % + 1 dgt.
Capacitance 51,2 nF ~ 100 µF; ± 3 % + 3 dgt.
Operation voltage 7,4 V/3500 mA DC Li-Ion-Akku or AC-Adaptor 110/240 V AC; 50/60 Hz, 8,5 V DC/1,5 A
Dimensions (WxHxD)  115 x 180 x 40 mm
Weight  650 g